A D V A N C E D
M A T E R I A L S
&
P R O C E S S E S | J A N U A R Y
2 0 1 6
2 5
of mechanical and industrial engi-
neering, Northeastern University, 360
Huntington Ave., Boston, MA 02115,
617.373.5558,
h.huang@neu.edu,ilab. coe.neu.edu
.
Acknowledgments
The authors acknowledge finan-
cial support from the Department of
Energy Office of Basic Energy Sciences
(DE-SC0014035), and Hanchen Huang
also thanks Jianmin Qu for suggesting
applications involving heat sinks.
References
1. S. Kalpakjian and S. Schmid,
Manu-
facturing Engineering and Technology
,
7th Ed., Pearson, Upper Saddle River,
NJ, 2014.
2. J. Lewis, Material Challenge for Flex-
ible Organic Devices,
Mater. Today
, Vol.
9, p 38-45, 2006.
3. S.R. Harshorn, Structural Adhesives:
Chemistry and Technology, Plenum
Press, New York, NY, 1986.
4. R.B. Fair, Challenges to Manufac-
turing Submicron, Ultra-Large Scale
Integrated Circuits,
Proceedings of the
IEEE
, Vol 78, p 1687-1705, 1990.
5. R. Viswanath, et al., Thermal Per-
formance Challenges from Silicon to
Systems,
Intel Technol. J.,
Vol 4, No. 3,
p 1-16, 2000.
6. J.A. King,
Material Handbook for
Hybrid Microelectronics
, Artech House,
Norwood, MA, 1988.
7. H.D. Young,
University Physics
, 7th Ed.,
Addison Wesley, Reading, MA, 1992.
8. J.P. Gwinn and R.L. Webb, Perfor-
mance and Testing of Thermal Inter-
face Materials,
Microelectr. J
., 2003.
9. G. Henshall, J. Bath, and C.A. Hand-
werker,
Lead-Free Solder Process Devel-
opment
, Wiley, Hoboken, NJ, 2011.
10. A. DerMarderosian and V. Gionet,
The Effects of Entrapped Bubbles in
Solder Used for the Attachment of
Leadless Ceramic Chip Carriers,
Reli-
ability Physics Symposium
, p 235-241,
1983.
11. S.P Stagon, P.R. Elliott, and H.C.
Huang, Low-Temperature Welding with
Spaced Nanorods and Eutectic Alloys,
U.S. Patent Application No. 62/196,684,
2015.
12. M.M. Hawkeye and M.J. Brett,
Glancing Angle Deposition: Fabrication,
Properties, and Applications of Micro-
And Nanostructured Thin Films,
J. Vac.
Sci. Technol. A
, Vol 25, p 1317-1335, 2007.
13. L.G. Zhou, and H.C. Huang, Small-
est Separation of Nanorods from Phys-
ical Vapor Deposition,
Appl. Phys. Lett.
,
Vol 100, p 141605, 2012.
14. X.B. Niu, et al., Smallest Metallic Na-
norods Using Physical Vapor Deposition,
Phys. Rev. Lett.
, Vol 110, p
136102,
2013.
15. S.P. Stagon and H.C. Huang, Airtight
Metallic Sealing at Room Temperature
under Small Mechanical Pressure,
Sci.
Rep
., Vol 3, No. 3066, 2013.
16. Y. Lu, et al., Cold Welding of Ultra-
thin Gold Nanowires,
Nat. Nanotech-
nol
., Vol 5, p 218-224, 2010.
17. S.P. Stagon and H.C. Huang,
Low-temperature Bonding and Sealing
with Spaced Nanorods, International
Patent No. WO/2014/205193, 2014.
Combining advanced specifications with an affordable, modern design, Shimadzu’s AGS-X Series of floor and tabletop universal testers delivers practical solutions across a wide range of applications. By incorporating multiple control options, load cells with maximum capacities from 1 N to 300 kN, and the utmost in safety considerations, the AGS-X series is the choice for easier, more efficient testing . Shimadzu’s AGS-X Series features: ■ Accurate stress-strain curves with Class 0.5 load cells ■ High-speed data sampling up to 1 msec (1 kHz) ■ Precise stress- and strain-controlled testing ■ Comprehensive safety measures ■ Easy-to-use software with a refined user interface for more efficient, effective testing Shimadzu Scientific Instruments Inc., 7102 Riverwood Dr., Columbia, MD 21046, USA Learn more. Call (800) 477-1227 or visit us online at www.ssi.shimadzu.com/AGSX Practical, Cost-effective Electromechanical Testers In addition, a comprehensive selection of grips, compression plates, jigs, extensometers, and other accessories allow configurations to be tailored to almost any application. Adaptable to Countless Applications