April_AMP_Digital
A D V A N C E D M A T E R I A L S & P R O C E S S E S | A P R I L 2 0 1 8 2 9 Casting Method, J. Matls. Proc. Technol., 92, p 1-7, 1999. 7. S.C. Tjong and Z.Y. Ma, Micro structural and Mechanical Charac- teristics of In Situ Metal Matrix Composites, Matls. Sci. and Engr.: R: Reports, 2000 29, (3), p 49-113, 2000. 8. C.J. Brinker, et al., Symp. Better Ceramics Through Chemistry, North- Holland, 1984. 9. D.C. Bradley, Metal Alkoxides as Precursors for Electronic and Ceramic Materials, Chem. Rev., 89, (6), p 1317-22, 1989. 10. S. Yajima, et al., Development of a Silicon Carbide Fibre with High Tensile Strength, Nature, 261, (5562), p 683-5, 1976. 11. P. Colombo, et al., Polymer-Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics, J. Amer. Ceram. Soc., 93, (7), p 1805-37, 2010. 12. E. Castellan, G. Ischia, A. Molinari, and R. Raj, A Novel In Situ Method for Producing a Dispersion of a Ceramic Phase Into Copper that Remains Stable at 0.9 Tm, Metall. and Matls. Trans. A, 44, (10), p 4734-42, 2013. 13. E. Castellan, et al., Low-Wear High- Friction Behavior of Copper Matrix Composites Dispersed With an In Situ Polymer Derived Ceramic, J. of Tribol., 137, (2) p 024501, 2015. 14. M.K. Surappa and P.K. Rohatgi, Preparation and Properties of Cast Aluminium-Ceramic Particle Compo- sites, J. Matls. Sci., 16, (4), p 983-93, 1981. 15. Sudarshan, et al., Nanoceramic- Metal Matrix Composites by In-Situ Pyrolysis of Organic Precursors in a Liquid Melt, Metall. and Matls. Trans. A, 39, (13), p 3291-7, 2008. 16. Sudarshan, et al., Polymer-Derived In-SituMetal MatrixComposites Created by Direct Injection of a Liquid Polymer into Molten Magnesium, Metall. and Matls. Trans. A, 45, (2), p 551-4, 2014. 17. N.M. Chelliah, et al., Stress-Rupture Measurements of Cast Magnesium Strengthened by In-Situ Production of Ceramic Particles, J. Magnesium and Alloys, 2017. 18. N.M. Chelliah, et al., Processing, Microstructural Evolution and Strength Properties of In-Situ Magnesium Matrix Composites Containing Nano-Sized Polymer Derived SiCNO Particles, Matls. Sci. and Engrg.: A, 685, p 429-38, 2017. 19. N.M. Chelliah, et al., Microstructural Evolution and Strengthening Behavior in In-Situ Magnesium Matrix Compo- sites Fabricated by Solidification Pro- cessing, Matls. Chem. and Phys., 194, p 65-76, 2017. 20. N.M. Chelliah, et al., A Polymer Route to the Design of Thermally Stable Metal Matrix Composites: Materials Selection and In-situ Processing, Res. and Reports on Metals, Dec. 4, 2017. Selected References 1. T. Cross, et al., Mechanical and Tribological Behavior of Polymer- Derived Ceramics Constituted from SiCxOyNz. J. Amer. Ceram. Soc., 89, (12), p 3706-14, 2006. 2. L. Yu and R. Raj, On the Thermo- dynamically Stable Amorphous Phase of Polymer-Derived Silicon Oxycarbide, Scientific Reports, 2015.
Made with FlippingBook
RkJQdWJsaXNoZXIy MjA4MTAy