April_AMP_Digital

A D V A N C E D M A T E R I A L S & P R O C E S S E S | A P R I L 2 0 1 8 1 9 P art l of this article (February/March 2018) discussed historical aspects of titanium discovery and process- ing, growth and current status of the industry, and traditional manufacturing aspects. This article discusses de- velopment of new production techniques, specifications, economic aspects, and applications. PRODUCTION AND PROCESSING R&D The Kroll process is a slow batch process, making it very expensive. In the 1950s, DuPont, Horizons Titani- um Corp., Kennecott Copper, Monsanto, and National Re- search Corp. invested heavily in developing newprocesses without success. Subsequent attempts by Dow-Howmet, RTI, and other companies led to incremental improve- ments, but nothing replaced the Kroll process. Along with the metallurgical difficulties, volatility of the econom- ic market for titanium made heavy investment in experi- mental technologies difficult. The batch sponge process accounts for less than 40% of the final mill product cost. The next step in pro- duction is pressing and/or forging, both time-consum- ing processes, which explains why a replacement for the batch process alone will not bring the price down suffi- ciently to make titanium use commonplace. It also ex- plains the interest in titanium powder metallurgy (PM) technology [1,2] , which would lower the final cost by greatly reducing the number of processing steps com- pared with the conventional ingot metallurgy tech- nique (Fig. 1), opening the metal to a wider range of applications. PM produces near-net-shape parts direct- ly. However, problems associated with PM include con- tamination, danger of explosion, and difficulties in mak- ing large parts. Research on replacing or modifying the Kroll process has increased since the 1990s, focusing mostly on PM. Oak Ridge National Laboratory (ORNL) and industry partners are developing a non-melt consolidation process that could reduce the energy and costs required tomake titani- um PM parts by up to 50%. The process includes roll com- paction for directly fabricating sheet from powder, press and sinter techniques to produce net-shape components, and extrusions. Research in Japan is concentrating on a high-speed continuous process using subhalide reduction in a titanium container. Commonwealth Scientific and Industrial Research Organization (CSIRO), Australia, developed a technolo- gy to produce cost-effective commercially pure (CP) ti- tanium using a continuous fluidized bed in which TiCl 4 is reacted with magnesium (TiRO process) [1] . This tech- nology is enabled by Australia’s large mineral sand de- posits. Continuous production of a wide range of alloys including aluminides, Ti-6Al-4V, and a number of Ti-Al al- loys has been demonstrated on a large laboratory scale. Ti powder has been used to fabricate extrusions, thin sheet by continuous roll consolidation, and cold sprayed complex shapes including ball valves and seamless tub- ing. Commercialization of the process is in the planning stage, to be followed by a pilot plant in the future. Scientists at Cambridge University, UK, devel- oped an approach (Fray-Farthing-Chen Cambridge or FCC Cambridge process) that uses titanium as an ef- ficient cathode, made possible by the removal of ox- ygen from the cathode [1] . The process extracts metals from their solid oxides by molten salt electrolysis (gen- erally with a CaCl 2 electrolyte). Using titanium di- oxide as an example, the sequence for TiO 2 is TiO 2 (solid, cathode) → molten salt electrolysis → Ti (cathode) + O 2 (anode). Metalysis, South Yorkshire, UK, is commer- cializing the process. In the U.S., several initiatives for industrially scal- able methodologies were funded by Defense Advanced Research Projects Agency (DARPA). In 2003, the first goal was to establish a U.S.-based, high volume, low cost, en- vironmentally benign production capability. The second goal was to develop and demonstrate unique, previously unattainable titanium alloys, microstructures, and prop- erties that enable new high-performance applications. DARPA also set a goal to produce high-quality titanium with a price of <$9/kg (<$4/lb) for billet with 500 ppmmax O 2 ; O 2 content in CP titanium is approximately 2000 ppm. One DARPA-funded project was the Armstrong pro- cess developed by International Titanium Powder LLC (ITP), Lockport, Ill. [1] . In 2008, ITP was acquired by Cristal USA Inc., Ashtabula, Ohio, a wholly owned subsidiary of Cristal Global, UK, which has extensive experience in the manufacture of TiCl 4 and has been supplying the chemi- cal to titanium sponge producers for more than 20 years. The Armstrong process is continuous and uses molten so- dium to reduce TiCl 4 (the Hunter process), which is inject- ed into it as a vapor [3-5] . The powder requires no further purification and can be used in traditional melt-to-billet Fig. 1 — The titanium powder metallurgy approach (Armstrong process, bottom row) would reduce final product cost by great- ly decreasing the number of processing steps compared with the conventional ingot-metallurgy technique [1] .

RkJQdWJsaXNoZXIy MjA4MTAy