May_EDFA_Digital
edfas.org 5 ELECTRONIC DEVICE FAILURE ANALYSIS | VOLUME 20 NO. 2 open, unsealed relay is unlikely, as the nitrogen oxides diffuse out of the relay, assisted by the pumping effect of the relay contacts. However, diffusion mechanisms work inbothdirections. Undesirable constituents fromthe envi- ronment can enter an unsealed relay and cause a failure, aswe sawpreviouslywith silicon vapor. Depositionof solid phosphorus oxide or phosphoric acid on relay contacts is especially likely to trigger another self-centering failure mechanism (Fig. 2). Phosphorus in the form of “red phosphorus” is often added to plastics as a flame retardant. The red phospho- rous decomposes in the presence of heat and humidity to become phosphine (PH 3 ), which disperses in the ambient air and enters the relay through diffusion. The source of phosphorous on relay contacts is rarely the plastic of the relay itself. The red phosphorous is mostly used in the plastic of the enclosure of the PCBA— or even in plastic enclosures or components somewhere else in the control cabinet. Once again, the comparatively cold relay contacts are in a unique position. On the metal surface, the phosphine gas oxidizes and is deposited as a solid phosphorous oxide or phosphorous acid. The relay contacts work as a sink for the phosphine gas. More and more of the phosphorous acid appears in the form of a Fig. 2 Failed contact: (a) optical microscope; (b) optical microscope, polarized light; (c) SEM image of nonconductive crystals; and (d) EDX analysis of phosphorus and oxygen.
Made with FlippingBook
RkJQdWJsaXNoZXIy MjA4MTAy