May_EDFA_Digital

edfas.org 53 ELECTRONIC DEVICE FAILURE ANALYSIS | VOLUME 20 NO. 2 • J. Lin, Y. Lei, H. Fu, et al.: “Effect of Strain Rate on Joint Strength and FailureMode of Lead-Free Solder Joints,” J. Electron. Mater., 2018, 47, p 2073. • Z.L.Ma, S.A. Belyakov, K. Sweatman, et al.: “Harnessing Heterogeneous Nucleation to Control Tin Orienta- tions in Electronic Interconnections,” Nat. Commun., 2017, 8, p 1916; also see M. Lee, “Research Highlight: Interconnects Orientated Against Failure,” Nat. Commun., 2017, 8, p 1916. • A. Markman and B. Javidi, “Integrated Circuit Authentication using Photon-limited X-Ray Microscopy,” Opt. Lett., 2016, 41, p 3297. • M. Pecht, T. Shibutani, M. Kang, et al.: “A Fusion Prognostics-based Qualification Test Methodology forMicroelectronicProducts[Review],” Microelectron. Reliab., 2016, 63, p 320. • J. Peng, R.C. Wang, M. Wang, et al.: “Interfacial Microstructure Evolution and Shear Behavior of Au-Sn/Ni-xCu Joints at 350°C,” J. Electron. Mater., 2017, 46, p 2021. • S E. Quadir, J Chen, M. Tehranipoor, et al.: “A Survey on Chip to System Reverse Engineering,” J. Emerg. Technol. Comput. Syst., 2016, 13, p 6. • F. Rahman, B. Shakya, M. Tehranipoor, et al.: “Security Beyond CMOS: Fundamentals, Applications, and Roadmap,” IEEE Trans. Very Large Scale Integr. (VLSI) Syst., 2017, 25, p 3420. • S. Sivasuthan, V.U. Karthik, A. Rahunanthan, et al.: “Addressing Memory and Speed Problems in Nondestructive Defect Characterization: Element- by-Element Processing on a GPU,” J Nondestruct. Eval., 2015, 34, p 9. • E. Suhir, S. Yi, R. Ghaffarian: “How Many Peripheral SolderJointsinaSurfaceMountedDesignExperience Inelastic Strains?,” J. Electron. Mater., 2017, 46, p 1747. • S. Tajik, E. Dietz, C. Boit, et al.: “Photonic Side- Channel [Attack] Analysis of Arbiter PUFs [Physically Unclonable Functions],” J. Cryptology, 2017, 30, p 550. • S. Taoufik, P. Dherbécourt, A.E Oualkadi, et al.: “Reliability and Failure Analysis of UHFRFIDPassive Tags Under Thermal Storage,” IEEE Trans. Dev. Mater. Reliab., Sept. 2017, 17(3), p 531. • S. Wagle, A. Habib and F. Melandsø: “Ultrasonic Measurements of Surface Defects on Flexible Circuits using High-Frequency Focused Polymer Transducers,” Jpn. J. Appl. Phys., 2017, 56, p 07JC05. • Y. Wang, J. Han, Y. Wang, et al.: “Effect of the Angle BetweenSnGrain c-Axis andElectron FlowDirection on Cu-Reinforced Composite Solder Joints under Current Stressing,” J. Electron. Mater., 2018, 47, 96. • J. Wei, S. Liu, W. Sun, et al.: “Failure Analysis and Improvement for HighPower Single-PhaseModule,” IEEE Trans. Dev. Mater. Reliab., 2017, 17, p 170. • J.G. Yong, P. Lei, J. Lin, et al.: “The Failure Models of Lead Free Sn-3.0Ag-0.5Cu Solder Joint Reliability under Low-G and High-G Drop Impact,” J. Electron. Mater., 2017, 46, p 1396. • N. Zhao, J.F. Deng, Y. Zhong, et al.: “Abnormal Intermetallic Compound Evolution in Ni/Sn/Ni and Ni/Sn-9Zn/Ni Micro Solder Joints under Thermomigration,” J. Electron.Mater., 2017, 46, p1931. • B. Zhou, W. Zhang, T. Srikanthan, et al.: “Cost-Efficient Acceleration of Hardware Trojan Detection through Fan-Out Cone Analysis and Weighted Random Pattern Technique,” IEEE Trans. Comput.-AidedDesign Integr. Circuits Syst., 2015, 35, p 792. • Y. Zuo, T.R. Bieler, Q. Zhou, et al.: “Electromigration and Thermomechanical Fatigue Behavior of Sn0.3Ag0.7CuSolder Joints,” J. Electron. Mater., 2018, 47, p 1881. Whether networking at events or accessing information through EDFA , ISTFA proceedings, or journals, our members have the edge. Now it’s time to introduce EDFAS to others in the industrywhowould like to take advantage of these career- enhancing benefits. Help us help the industry by expanding our membership and offering others the same exceptional access to information and networking that sets EDFAS apart. To reacquaint yourself with and introduce others to the EDFAS member benefits, visit asminternational.org/web/edfas/membership. EDFAS MEMBERSHIP

RkJQdWJsaXNoZXIy MjA4MTAy