May_EDFA_Digital

edfas.org ELECTRONIC DEVICE FAILURE ANALYSIS | VOLUME 20 NO. 2 12 from the same position when comparing against a refer- ence waveform. BUILDING UP A REFERENCE LVP LIBRARY Once an optimum probe position is selected for a cell—usually on the active device that drives the output—a reference library can be built. If a combinational cell has N-inputs, the number of elements in the truth table = 2 N . Therefore, a 2-input NAND gate will need at least four vectors, a 3-input NAND will need eight, and so on. The following list summarizes the CLA steps: 1. The loadcycles of a scan logicpatternareusually looped with care to ensure the scan flops connected to the cell of interest are toggled frequently. 2. The inputs of the cell are first probed at a random inter- val of the loading cycle using a relatively large time span. 3. A suitable time window is selected in which the toggles create all the combinations needed to completely fill up the truth table. 4. A reference library is built from known good cells and compared against the cell under inspection. LVP LIBRARY Most standard cells have complementary NMOS and PMOS transistors, either of which can describe the cell’s logic state. The CLA library presented in Fig. 3 is based on signals from the PMOS, but a similar one can be (continued on page 14) Fig. 2 Scan flops connect to most digital circuitry directly or through a combinational logic path. When the flops toggle, the stimulus propagates to the logic elements under inspection. Fig. 3 Summary of the CLA library of an inverter, a 2-input NAND, and a 2-input NOR cell. The first two columns show the schematic and layout, with the yellow polygon indicating probe position. The last two columns show the LVP library and truth table. While an inverter has only two LVP states, the NAND and NOR cells have multiple states due to the modulation effects of multiple interacting transistors within the probe spot.

RkJQdWJsaXNoZXIy MjA4MTAy