edfas.org ELECTRONIC DEVICE FAILURE ANALYSIS | VOLUME 27 NO. 1 24 2. N. Antoniou and B. Foran: “The EDFAS FA Technology Roadmap—FA Future Roadmap,” EDFA, May 2023, 25(2), p. 44-46, doi.org/10.31399/ asm.edfa.2023-2.p044. 3. M. Mullen: “Wide Bandgap – Semiconductor Failure Analysis – Illuminating Semiconductors,” 2024, thermofisher.com/blog/ semiconductors/failure-analysis-of-wide-bandgap-semiconductordevices. 4. P. Kehayias, et al.: “High-Resolution Short-Circuit Fault Localization in a Multilayer Integrated Circuit using a Quantum Diamond Microscope,” Phys Rev Appl, 2023, 20, p. 014036. 5. M. Garsi, et al.: “Three-dimensional Imaging of Integrated-circuit Activity using Quantum Defects in Diamond, Phys Rev Appl, 2024, 21, p. 014055. 6. L.A. Knauss: “Magnetic Field Imaging using a SQUID for Fault Isolation,” EDFA, May 2000, 2(2), p. 1-10, doi.org/10.31399/asm. edfa.2000-2.p001. 7. A. Orozco: “Magnetic Current Imaging in Failure Analysis,” EDFA, November 2009, 11(4), p. 14-21, doi.org/10.31399/asm.edfa. 2009-4.p014. 8. R.H. Good and T.J. Nelson: “Classical Theory of Electric and Magnetic Fields,” Academic Press, 1974. 9. E.V. Levine: “Principles and Techniques of the Quantum Diamond Microscope,” Nanophotonics, 2019, 8, p. 1945-1973. 10. K. Nikawa: "Optical Beam Induced Resistance Change (OBIRCH): Overview and Recent Results," 2003, p. 742-743, doi.org/10.1109/ LEOS.2003.1253014. 11. K. Nikawa, et al.: “Failure Analysis Case Studies using the IR-OBIRCH (Infrared Optical Beam Induced Resistance Change) Method,” Proceedings of the Asian Test Symposium, 1999, p. 394-399. 12. O. Breitenstein, et al.: “Thermal Failure Analysis by IR Lock-in Thermography,” 2011. 13. G.J. Abrahams, et al.: “An Integrated Widefield Probe for Practical Diamond Nitrogen-vacancy Microscopy,” Appl Phys Lett, 2021, 119, p. 254002. 14. B.D. Schrag, et al.: “Magnetic Current Imaging with Magnetic Tunnel Junction Sensors: Case Study and Analysis, 2005. 15. K. Chang, et al.: “Nanoscale Imaging of Current Density with a Single-Spin Magnetometer,” Nano Lett, 2017, 17, p. 2367-2373. 16. B.J. Roth, N.G. Sepulveda, and J.P. Wikswo: “Using a Magnetometer to Image a Two‐dimensional Current Distribution,” J Appl Phys, 1989, 65, p. 361-372. 17. D.A. Broadway, et al.: “Improved Current Density and Magnetization Reconstruction through Vector Magnetic Field Measurements,” Phys Rev Appl, 2020, 14, p. 024076. 18. N.R. Reed, et al.: “Machine Learning for Improved Current Density Reconstruction from 2D Vector Magnetic Images,” 2024, https://arxiv. org/abs/2407.14553v1. 19. J.F. Barry, et al.: “Sensitive ac and dc Magnetometry with Nitrogenvacancy-center Ensembles in Diamond,” Phys Rev Appl, 2024, 22, p. 044069. ABOUT THE AUTHORS Marwa Garsi holds a Ph.D. in quantum technologies from the Technical University of Stuttgart, where she pioneered foundational work in NV-based imaging for semiconductor electrical fault analysis. She leads the hardware development department at QuantumDiamonds. Andreas Welscher holds a M.Sc. in physics from the Technical University of Munich and works at QuantumDiamonds. He has extensive experience in performing NV-based failure analysis tests and has performed all the measurements presented in this paper. Manuel Schrimpf holds a M.Sc. in chemistry from the Technical University of Munich. He performed magnetic field data analyses at QuantumDiamonds and has played a pivotal role in developing the analytical code used in the presented work. Bartu Bisgin holds a joint M.Sc. in quantum science and technology from the Technical University of Munich and Ludwig-Maximilian University. He works at QuantumDiamonds as a project manager in the failure analysis market. He has expertise in design, nanofabrication, and testing of integrated photonics. Michael Hanke has a Ph.D. in physics from RKU Heidelberg. He has multiple years of experience in developing machine learning models and data analysis tools for spectroscopy, signal processing, and optical hardware from his work at BASF group. Currently he is spearheading software development at QuantumDiamonds and has significantly contributed to the data processing shown in this work. Horst A. Gieser holds a Ph.D. from the Technical University of Munich in electrical and electronics engineering. He currently leads the analysis and test department at Fraunhofer EMFT, where he oversees pioneering efforts in microelectronics and sensor systems.
RkJQdWJsaXNoZXIy MTYyMzk3NQ==