November_EDFA_Digital

edfas.org ELECTRONIC DEV ICE FA I LURE ANALYSIS | VOLUME 23 NO . 4 48 ITA LABS Material Testing Solutions Unit 3, Curo Park Frogmore, St. Albans Hertfordshire, AL2 2DD, UK +44.0.1727.871.300 support@italabs.co.uk dominic.lodge@italabs.co.uk www.italabs.co.uk/contact-us Services Offered: Harsh environmental testing services, electronics services, coating andplating thickness testing, counterfeit components detection, electronics failure analysis testing services, electronics reliability testing services, packaging testing, PCB quality control testing services, and RoHS compliance testing services. Tools and Techniques: Temperature cycling, thermal shock, salt spray and fog, high humidity and vibration, optical microscopy, SEM, solder joint strength testing, cross-sectioning, x-ray inspection, solderability testing, bromine FR analysis, Charpy impact testing, chromium (VI) analysis, cone calorimeter heat release rate service, counterfeit components testing, determination of gel content and swell ratio, differential scanning calorimetry, dilatometry, dye and pry analysis, ED-XRF, WD-XRF, FT-IR analysis, hardness testing, ignitability test EN ISO11925-2, Izod impact testing, joint strengthanalysis, limitingoxygen index, mechanical testing, microsectioning, NBS smoke density test, particle size analysis, pycnometry, Rockwell hardness testing, RoHSbromine speciationanalysis, shore hardness testing, sieving analysis service, simultaneous thermal analysis, UL-94 vertical/horizontal flame test, and Vickers hardness testing. MATERIALS CHARACTERIZATION SERVICES LLC 105 Sebastians Run Austin, TX 78738 800.685.2088 512.789.5600 support@mat-cs.com mat-cs.com/ Services Offered: Analytical techniques (bulk analysis, microscopy, surface/films, polymers, liquid/gases, and electrical. PRIORITY LABS 1251 S Sherman St., Suite 109 Richardson, TX 75081 214.926.7523 info@prioritylabs.com prioritylabs.com Services Offered: IC failure analysis, materials analysis, and counterfeit detection. Tools and Techniques: Scanning acoustic microscopy, FIB, deprocessing, cross-sectioning, decapsulation, dye and pry. SURFACECHAR LLC 8 Manns Hill Crescent Sharon, MA 02067 973.903.0660 info@surfacechar.com surfacechar.com Services Offered: Measurements and characterization specializing in scanning probe microscopy (SPM/AFM) and nano-indentation. Measurement services, training and classes, and technical writing. Tools and Techniques: Quantitative roughness analysis, particle sizing analysis, 3D visualization, overlaying of multiple channels, force curve fitting andanalysis, tapping mode, phase imaging, BIMODAL/multifrequencymethods, contact mode/lateral force mode, static force spectros- copy, force volume imaging, dynamic force spectroscopy, magnetic force microscopy, Kelvin probe microscopy, electrostatic force microscopy, and AFM-IR.