OCTOBER 15–18, 2024 | BONITA SPRINGS, FLORIDA 10TH INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS, MANUFACTURING & REPAIR FOR POWER PLANTS SHOW PREVIEW KEYNOTE LECTURES Practical Realities of the Global Energy Transformation Steve Chengelis Sr. Director Future Nuclear, EPRI Democratization of Advanced Manufacturing Dr. Suresh Babu, FASM, FAWS UT/ORNL Governor’s Chair of Advanced Manufacturing Professor, University of Tennessee For event details and to register, visit www.asminternational.org/epri-2024. Join us at the 10th International Conference on Advances in Materials, Manufacturing & Repair for Power Plants for a four-day event, October 15-18. As the world undergoes an energy transformation, the safe, reliable, a ordable, and environmentally responsible operation of today’s and tomorrow’s power plants requires continued advancement in high-temperature materials technology. Materials serve as the key enabling technology driving the development of high-e ciency power conversion technologies. The Electric Power Research Institute (EPRI) is proud to continue its partnership with ASM for its 10th Advances in Materials Conference, building on EPRI’s inaugural event in 1987 and rotating between the UK, Europe, North America, and the Pacific, with the most recent conference (2019) held in Nagasaki, Japan. For more information, visit www.asminternational.org/epri-2024. ORGANIZED BY: SPONSORS: MONDAY, OCTOBER 14 8:30 a.m.– 5:00 p.m. Pre-Conference Workshop: Case Studies in High Temperature Damage in Power Plant Components TUESDAY, OCTOBER 15 8:30 – 10:00 a.m. Welcome Address: John Shingledecker; Keynote: Steve Chengelis; Keynote: Suresh Babu 10:30 a.m. – 4:55 p.m. Technical Sessions: Component Manufacturing; Stainless Steels; Welding & Weld Repair; Advanced Manufacturing; Quantification/Codes & Standards 10:20 – 11:40 a.m. Poster Session and Reception WEDNESDAY, OCTOBER 16 8:30 – 10:00 a.m. Plenary: Materials & Manufacturing Innovations for Nuclear 10:30 a.m. – 4:45 p.m. Technical Sessions: Advanced Manufacturing; Welding & Weld Repair; Environmental Degradation; Materials Modeling; Life Assessment Ferritic Steel/ CSEF; High-Temperature Advanced Materials THURSDAY, OCTOBER 17 8:30 – 10:00 a.m. Plenary: Materials Performance in Thermal Power Plants 10:30 a.m. – 3:10 p.m. Technical Sessions: Damage Mechanisms; Ferritic Steel/CSEF; High-Temperature Advanced Materials; Claddings, Coatings, and Surface Modification; Nickel-based/Superalloy 5:30 – 7:30 p.m. Conference Dinner and Awards Banquet FRIDAY, OCTOBER 18 8:30 – 10:00 a.m. Plenary: Superalloys and Advanced Manufacturing for Gas Turbines 10:30 a.m. – 12:10 p.m. Technical Sessions: Ferritic Steel/CSEF; Nickelbased/Superalloy SCHEDULE-AT-A-GLANCE
RkJQdWJsaXNoZXIy MTYyMzk3NQ==