ADVANCED MATERIALS & PROCESSES | APRIL 2024 52 financially supported by the Hong Kong Research Grants Council through the RGC-STG Project (No. STG2/E-605/23-N), the RGC-GRF Projects (No. 16212322, No. 16204422), and the Hong Kong Innovation and Technology Fund (Grant No. ITS/030/22MS). Work at the University of Maryland was supported by the U.S. Department of Energy under DE-EE0009159 and the Advanced Research Projects Agency- Energy (ARPA-e) under ARPA-e DEAR0000131. For more information: Jun Cui, professor, Iowa State University, 2220 Hoover Hall, 528 Bissell Rd., Ames, IA 50011, cuijun@iastate.edu. References 1. E. Bonnot, et al., Elastocaloric Effect Associated with the Martensitic Transition in Shape-memory Alloys, Phys. Rev. Lett., Vol 100, p 125901, 2008. http://dx.doi.org/10.1103/ PhysRevLett.100.125901. 2. J. Quarini and A. Prince, Solid State Refrigeration: Cooling and Refrigeration Using Crystalline Phase Change in Metal Alloys, Proc. Inst. Mech. Engrs., Vol 218 (C), p 1175-1178, 2004. http://dx.doi.org/10.1243/0954406042369062. 3. S. Qian, et al., A Review of Elastocaloric Cooling: Materials, Cycles and System Integrations, Int. J. Refrig., Vol 64, p 1-19, 2016. 4. J. Cui, et al., Demonstration of High Efficiency Elasto- caloric Cooling with Large ΔT using NiTi Wires, Appl. Phys. Lett., Vol 101, p 073904, 2012. https://doi.org/10.1063/1.4746257. 5. N. Michaelis, et al., Investigation of Elastocaloric Air Cooling Potential Based on Superelastic SMA Wire Bundles, ASME 2020 Conference on Smart Materials, Adaptive Structures and Intelligent Systems-SMASIS20, 2020. 6. G. Zhou, et al., Giant Temperature Span and Cooling Power in Elastocaloric Regenerator, Joule, Vol 7, p 20032015, 2023. 7. G. Zhou, et al., A Multi-Material Cascade Elastocaloric Cooling Device For Large Temperature Lift, Nat. Energy (accepted), 2024. 8. S. Qian, et al., Design, Development and Testing of a Compressive Thermoelastic Cooling Prototype, Proc. Int. Congress Refrig., Paper 0092, Japan, 2015. 9. Y. Kawarada, et al., Abnormal Grain Growth of 68Cu-16Al16Zn Alloys for Elastocaloric Cooling via Cyclical Heat Treatments, J. Phys.: Energy, Vol 5, p 024012, 2023. 10. S. Qian, et al., High-Performance Multi-Mode Elastocaloric Cooling Systems, Science, Vol 380, p 722-727, 2023. 6 FEATURE SMST 2024 EXHIBITOR SHOWCASE Visit this key exhibitor and more at the Shape Memory and Superelastic Technologies Conference and Exposition in Cascais, Portugal. EXHIBITION HOURS Hotel Cascais Miragem, Portugal Monday, May 6 • 5:30 – 7:00 p.m. Welcome Reception with Exhibitors Tuesday, May 7 • 9:00 a.m. – 6:30 p.m. Wednesday, May 8 • 9:00 a.m. – 5:00 p.m. Established over 70 years ago, Norman Noble remains committed to leading development of advanced manufacturing processes required for our medical OEM customers. Norman Noble’s exclusive STEALTH athermal laser technology enables the manufacturing of next-gen medical implants made from thin and thick wall Nitinol without producing any heat affected zone (HAZ). Please contact us to learn more about our new Rapid Prototyping services. nnoble.com – Booth 1
RkJQdWJsaXNoZXIy MTYyMzk3NQ==