FEATURE ADVANCED MATERIALS & PROCESSES | MAY/JUNE 2023 55 James Jan of Ford Motor Co. and D. Scott MacKenzie, FASM, of Quaker Houghton for their paper, “On the Development of Parametrical Water Quenching Heat Transfer Model Using Quenchometer and Its Validation for All Boiling Regimes,” published in the 2019 HTS Conference Proceedings. 2021 Liang He, Thomas Phillips, Donald J. Bowe, Guido Plicht, and Mark K. Weise of Air Products and Chemicals for their paper, “Understanding and Optimizing Nitrogen-Hydrogen Furnace Atmospheres for Annealing,” published in the February/March 2020 issue of HTPro. Steve Offley of Phoenix Temperature Measurement for his paper, “Thru-Process Temperature Profiling and Surveying,” published in the May/June 2020 issue of HTPro. 2022 Kyozo Arimoto of Arimotech Ltd., for his paper, “A Brief Review on Validation for Heat Treatment Simulation,” published in 2021 HTS Conference Proceedings. Thomas Wingens of Wingens LLC International Industry Consultancy for his paper, “Retained Austenite Benefits or Avoidance Requires Dependable Determination,” published in the 2021 Heat Treating Conference Proceedings; a condensed version appears in the July/August 2022 issue of HTPro. 2023 Sean Muyskens of Fluxtrol for his presentation, “Simulation and Modeling to Validate SMC Impeder Performance,” given at IMAT 2022 in New Orleans. Ed Rolinski, A. Springer, and M. Woods of Advanced Heat Treat Corp. for their article, “Practical Aspects of Plasma Nitriding Kinetics for 17-4PH Stainless Steel,” published in the July/August 2022 issue of HTPro. PRIME CONTRIBUTOR WINNERS 2018 James Jan and Madhusudhan Nannapuraju of Ford Motor Co. for their paper, “CFD Investigation of Quench Media and Orientation Effects on Structural Stress Induced in the Intense Quenching Processes for Aluminum Cylinder Heads.” The full paper was published in the 2017 HTS Conference Proceedings; a condensed version appears in the May/June 2018 issue of HTPro. Gary Doyon, Valery Rudnev, FASM, Collin Russell, and John Maher of Inductoheat Inc. for their paper, “Revolution—Not Evolution—Necessary to Advance Induction Heat Treating,” published in the September 2017 issue of HTPro. 2019 Volker Heuer and Gunther Schmitt of ALD Vacuum Technologies GmbH for their paper, “Digital Quality Control of Thermochemical Processes— Industry 4.0,” published in the 2018 Thermal Processing in Motion Conference Proceedings. Jim McAllister of SGL Group-The Carbon Company, for his paper, “New C/C Info and Performance in Oil Quenching,” published in the 2018 Thermal Processing in Motion Conference Proceedings. 2020 Magnus Ahlfors of Quintus Technologies for his paper, “High Pressure Heat Treatment of AM Parts – Combining HIP and Heat Treatment,” published in the 2019 HTS Conference Proceedings. WIN AWARDS, PUBLISH WITH HTPro Many Prime Contributor award winners originated as articles in HTPro. Submitting an article for consideration is easy. Feature articles in HTPro generally range from 1000-1500 words with three or four supporting high-resolution images (photos, graphs, charts, or illustrations). Articles may also be shorter or longer as needed to convey the subject matter. Please keep references to a minimum, no more than 10 if possible. Authors do not need to format articles in any way; a simple Word file is fine. Send manuscripts and questions to Vicki Burt, vicki.burt@ asminternational.org. 6
RkJQdWJsaXNoZXIy MTYyMzk3NQ==