FEATURE A D V A N C E D M A T E R I A L S & P R O C E S S E S | J U L Y / A U G U S T 2 0 2 2 5 9 For more information: Edward Rolinski, senior scientist, Advanced Heat Treat Corp., 1625 Rose St., Monroe, MI 48162, 319.232.5221, doctorglow@ion-nitriding.com, www.ahtcorp.com. References 1. A. Alshara, J. Lindsay, and E. Rolinski, Study of Ion Nitriding of 17-4 PH Steel, AHT Corp. Internal Report, 2007. 2. W. Oppel, Internal technical report, Klöckner Ionon GmbH, Cologne, 1977. 3. H. Nakagawa, T. Miyazaki, and H. Yokota, Effects of Aging Temperature on the Microstructure and Mechanical Properties of 1.8Cu-7.3Ni-15.9Cr-1.2Mo-Low C, N Martensitic Precipitation Hardening Stainless Steel, Journal of Materials Science, Vol 35, p 2245-2253, 2000. 4. E. Rolinski, J. Arner, and G. Sharp, Negative Effects of Reactive Sputtering in an Industrial Plasma Nitriding, J. Mater. Eng. Perform., Vol 14 No. 3, p 343-350, June 2005. 5. Y. Sun and T. Bell, Low Temperature Plasma Nitriding Characteristics of Precipitation Hardening Stainless Steel, Surface Engineering, Vol 19, No. 5, p 331-336, 2003. 6. S.R. Collins, Surface-finishing Techniques for Stainless Steel Passivation, Solid State Technology, p 28 and 31, May 2006. 7. S. Jadeja, B. Ganguli, and D.K. Basa, Surface Modification of 17-4PH Stainless Steel by Plasma Nitriding, Int. Res. J. Eng. Technol., ISSN: 2278-0181, Conference Proceedings, p 1-5, 2016. 8. C.E. Pinedo, et al., Low Temperature Active Screen Plasma Nitriding of 17–4 PH Stainless Steel, Surface & Coatings Technology, Vol 308, p 189–194, 2016. 9. E. Rolinski, et al., Effect of Surface Emissivity of the Cathode-Work Piece on Temperature Uniformity in Plasma Nitriding, Surface Engineering, Vol 20, No. 6, p 425-439, 2004. 10. P. Kochmanski and J. Nowacki, Influence of Initial Heat Treatment of 17-4 PH Stainless Steel on Gas Nitriding Kinetics, Surf. Coat. Technol., Vol 202, p 4834–4838, 2008. 11. R.L. Liu and M.F. Yan, Surf. Coat. Technol., The Microstructure and Properties of 17-4PH Martensitic PrecipitationHardening Stainless Steel Modified by Plasma Nitrocarburizing, 2010, doi:10.1016/j.surfcoat.2009.12.016. 12. K. Brondum, Private communication, 2007. 13. J. Wang, et al., Effects of Temperature on Microstructure and Wear of Salt Bath Nitrided 17-4PH Stainless Steel, J. Mater. Eng. Perform., Vol 21, p 1708–1713, August 2012, DOI: 10.1007/s11665-011-0077-z. Interested in advertising with the ASMHeat Treating Society? Contact Kelly “KJ” Johanns at kelly.johanns@asminternational.org. 9
RkJQdWJsaXNoZXIy MTYyMzk3NQ==