April AMP_Digital

9 The International Metallographic Society Information, relationships, and services that advance the careers of professionals involved in the examination, analysis, characterization, structure, and evaluation of materials. Join ASM and be part of this exclusive affiliate society! Become a member today. Visit ims.asminternational.org Atlas of Stress-Strain Curves, 2nd Edition 2002 • 816 pages ISBN: 978-0-87170-739-0 Product Code: 06825G Price: $349 / ASM Member: $259 More than 1400 curves normalized in appearance to aid making comparisons among materials. All diagrams include metric (SI) units, and many also include U.S. customary units captioned with standard designation, the primary source of the curve, mechanical properties, condition of sample, strain rate, test temperature, and alloy composition. Tensile Testing, 2nd Edition Edited by J.R. Davis 2004 • 283 pages ISBN: 978-0-87170-806-9 Product Code: 05106G Price: $137 / ASM Member: $105 A complete guide to the uniaxial tensile test, the cornerstone test for determining the mechanical properties of materials. Learn ways to predict material behavior through tensile testing, and how to test metals, alloys, composites, ceramics, and plastics to determine strength, ductility and elastic/ plastic deformation. Nondestructive Testing By L. Cartz 1995 • 229 pages ISBN: 978-0-87170-517-4 Product Code: 06390G Price: $107 / ASM Member: $75 Problems and defects of all kinds arise in the development and use of mechanical devices, electrical equipment, hydraulic systems, and transportation mechanisms. However, an extremely wide range of nondestructive testing (NDT) methods are available to help you examine these different problems and various defects in an assortment of materials under varying circumstances. TO ORDER, VISIT WWW.ASMINTERNATIONAL.ORG/REFERENCEPUBS OR CALL 800.336.5152 Metallographic Etching, 2nd Edition By G. Petzow 1999 • 240 pages ISBN: 978-0-87170-633-1 Product Code: 06670G Price: $127 / ASM Member: $95 An outstanding source on etchants of all types and electrolytic polishing solutions used by metallographers to reveal the structure of nearly any material to be prepared and examined. Metallography of Steels: Interpretation of Structure and the Effects of Processing By Hubertus Colpaert Updated and translated by André Luiz V. da Costa e Silv a 2018 • 699 pages ISBN: 978-1-62708-148-1 Product Code: 05922G Price: $229 / ASM Member: $169 This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. A valuable companion even for experienced steel practitioners. Hardness Testing: Principles and Applications Edited by Dr. Konrad Herrmann, et al. 2011 • 262 pages ISBN: 978-1-61503-832-9 Product Code: 05331G Price: $157 / ASM Member: $115 Hardness testing of metals, plastics, rubber and other materials. Technical developments such as the introduction of image processing in the Brinell and Vickers method, the adaptation of hardness testing machines to process- oriented testing conditions, and the development of highly accurate and efficient calibration methods. Optical Microscopy of Fiber- Reinforced Composites By Brian S. Hayes and Luther M. Gammon 2010 • 284 pages ISBN: 978-1-61503-044-6 Product Code: 05303G Price: $177 / ASM Member: $135 Optical microscopy is one of the most valuable, but under-utilized, tools for analyzing fiber-reinforced polymer matrix composites. Hands-on book covers: sample preparation, microscopic techniques, and applications. Over 180 full color images illustrate the technology’s power to study the microstructure of heterogeneous, anisotropic materials. Metallographer’s Guide: Practices and Procedures for Irons and Steels By B.L. Bramfitt and A.O. Benscoter 2002 • 354 pages ISBN: 978-0-87170-748-2 Product Code: 06040G Price: $257 / ASM Member: $185 Important metallurgical concepts related to the microstructures of irons and steels. More than 500 representative microstructures, and how they can be altered by heat treatment and other means. METALLOGRAPHY & MATERIALS CHARACTERIZATION