April_AMP_Digital
A D V A N C E D M A T E R I A L S & P R O C E S S E S | A P R I L 2 0 1 8 1 1 generated by similarities in the sulfur compounds and characterize the com- pounds separately. This is essential because different compounds exhibit different reactivity and total sulfur con- centration does not directly correlate with corrosiveness. Because crude oil contains a large number of sulfur com- pounds, each subtly different from the others, past results from less sensitive characterization techniques have been difficult to interpret. The x-ray absorp- tion spectroscopy work at SSRL allows the scientists to see a precise descrip- tion of the crude oil’s sulfur chemistry. chevron.com , www.usask.ca . IMPROVED TESTING ENABLES BETTER BODY ARMOR Scientists at the National Institute of Standards and Technology (NIST), Gaithersburg, Md., developed a new characterization method to investigate the high-performance fibers used in modern body armor, providing insight that could lead to development of more dependable and comfortable bul- letproof gear. After the failure of pro- tective gear made of second-genera- tion ballistic fibers led to the death of a police officer in 2003, tests revealed that the creasing experienced during normal use caused significant degradation of the fibers’ critical mechanical proper- ties, such as stiffness, tensile strength, and strain-to-failure. The team’s new materials characterization tool exam- ines the structural and chemical differ- ences in fibers that cause some ballistic materials to break down during folding and others to maintain their quality. First responders are among those whose lives depend on body armor—and the ballistic fibers inside of them. Courtesy of Shutterstock/NIST. damage: A larger population of voids means a higher chance of fiber fail- ure. Past analyses using small-angle x-ray scattering measurements were inconclusive because they were less sensitive to voids smaller than 5 nm. The new results could lead to develop- ment of alternatives to current body armor technologies or help fine-tune the amount of fibers currently used for these products, leading to more com- fortable gear. nist.gov. Developed using the intense pos- itron beam facility at North Carolina State University’s PULSTAR Nuclear Reactor, the new method uses posi- tron annihilation lifetime spectroscopy (PALS) to provide a molecular-level view of the structure of materials. By injecting positrons into ballistic fibers, researchers first determined if any voids smaller than 5 nm were cre- ated during folding. Then using PALS, researchers discovered that void levels are very sensitive indicators of folding
Made with FlippingBook
RkJQdWJsaXNoZXIy MjA4MTAy