November_EDFA_Digital

edfas.org 39 ELECTRONIC DEVICE FAILURE ANALYSIS | VOLUME 22 NO. 4 INSIGHT ANALYTICAL LABS 11641 Ridgeline Dr., Unit 150 Colorado Springs, CO, 80921 719.570.9549 ial-fa.com Services Offered: Destructive and nondestructive failure analysis and fault isolation, reverse engineering, and counterfeit IC inspection. Tools and Techniques: X-ray inspection, 2D and 3D real- time x-ray, SAM (including c-mode scanning), optical inspection (dark field, bright field, polarized, high-reso- lution mosaic functionality), electrical test equipment, IRmicroscopy, XRF, FTIR, EDS, hi-pot and insulation resis- tance testing, cross sectioningof ICs andPCBs (mechanical and FIB), FIB editing, SEM and FE-SEM, IC deprocessing, parallel lapping, dry andwet etching, reactive ion etching, STEMprepand imaging, dye andpry (BGAdevices), decap- ping anddepotting (ICs), solderability analysis, PEM, liquid crystal analysis, LIVA/TIVA analysis, thermal imaging, and electrical probing. LABORATORY TESTING INC. 2331 Topaz Drive Hatfield, PA 19440 800.219.9095 sales@labtesting.com www.labtesting.com Services Offered: Materials testing, nondestructive testing, metal testing, failure analysis, fastener testing, specimen machining, weld testing, metrology, and calibration. Tools and Techniques: Mechanical testing, hardness testing, magnetic permeability, double shear, yield strength, wedge and axial tensile, proof load testing, tension fatigue test, cone strip test, flattening, stress rupture test, creep testing, hydrogen embrittlement/ stress durability, metallurgical testing, macro-etch, grain flow, microstructure, grain size, plating thickness, surface contamination, alpha case, carburization/decarburization, microhardness, ICP analysis, AES analysis, inert gas fusion for hydrogen, nitrogen, and oxygen, combustion method for sulfur and carbon, PMI, FTIR analysis, salt spray, magnetic particle inspection, liquid penetrant testing, ultrasonic testing, x-ray inspection (radiography), and dimensional inspection. METALLURGICAL ENGINEERING SERVICES INC. 845 E. Arapaho Rd. Richardson, TX 75081 972.480.0033 sales@metengr.com metengr.com Services Offered: Chemical, failure, and surface analysis, welder certification, mechanical, metallurgical, polymer, and nondestructive testing, reverse engineering, joint laboratory inspection, expert witness services, andon-site investigation. Tools and Techniques: EDS, FTIF analysis, OES, WDS, XRD, XRF, immersion corrosion, salt fog, WPS, WPQ, bend testing, dropweight tear test, flexural testing, impact resis- tance, hardness testing, micro hardness, shear testing, tensile testing, abrasion testing, adhesion testing, mac- rotech exam, metallographic exam, sample preparation, stereo microscopy, corrosion testing, specimen machin- ing, fracture mode & mechanism, dye penetrant, eddy current testing, guided wave ultrasound, magnetic par- ticle, portable hardness, strain gauge testing, ultrasonic flaw inspection, visual inspection, x-ray, weld inspection, oxidative degradation, chemical attack, adhesion prob- lems, additive issues, voids and blisters, discoloration, fraction mode & mechanism, particle analysis, and scan- ning electron microscopy. MUANALYSIS INC. 2301 St. Laurent Blvd., Suite 500 Ottawa, Ontario Canada K1G 4J7 866.238.4664 info@muanalysis.com Services Offered: Failure analysis, reliability testing, material analysis, teardown reports, fabrication support and training. Tools and Techniques: X-ray, scanning acoustic micros- copy, decapsulation, optical microscopy, laser scanning microscopy, backside emission microscopy, SEM, BGA layer by layer construction analysis, pin testing, static DC biasing, optical beam induced current, FTIR spectroscopy, EDX spectroscopy, MuAnalysis joint integrity character- ization, counterfeit detection, confocal laser scanning microscopy, Raman spectroscopy, shear test, bend test and tensile test, temperature cycling, and ESD testing. NERSIC MATERIAL TESTING, ANALYTICAL CHARACTERIZATION AND CONSULTING LABORATORY Chemistry Department, University of Waterloo 200 University Avenue West Waterloo, Ontario, Canada N2L3G1 877.819.8786 sales@nersic.com nersic.com Services Offered: Analytical services, consulting and training services, corrosion, contamination, defect analy- sis, elemental maps, delamination, and depth profiling. Tools and Techniques: Atomic force microscopy, ATR- FTIRmicroscope, correlativemicroscopy, electrochemical station, energy-dispersive x-ray spectroscopy on SEM, FE-SEM and environmental SEM, FIB-SEM, NMR, Raman microscopy, scanning auger microscopy, SIMS, TEM and STEM, XPS (ESCA), and XRD (powder and thin film).