August_EDFA_Digital

edfas.org 49 ELECTRONIC DEVICE FAILURE ANALYSIS | VOLUME 21 NO. 3 com/a/new-type-of-noise-found-lurking-in-nanoscale- devices/). • J. Martinek, M. Valtr, V. Hortvík, et al.: “Large Area Scanning Thermal Microscopy and Infrared Imaging System,” Meas. Sci. Technol., 2019, 30, p 035010. • A. Mendioroz, R. Celorrio, and A. Salazar: “Ultrasound Excited Thermography: An Efficient Tool for the Characterization of Vertical Cracks [Review],” Meas. Sci. Technol., 2017, 28, p 112001. • L. Muzika, M. Švantner, and M. Kučera: “Lock-In and Pulsed Thermography for Solar Cell Testing,” Appl. Opt., 2018, 57, p D90. • R.A. Osornio-Rios, J.A. Antonino-Daviu, and R.J. Romero-Troncoso: “Recent Industrial Applications of Infrared Thermography: A Review,” IEEE Trans. Ind. Informat., 2019, 15, p 615. • X. Perpiñà1, J. León, J. Altet, et al.: “Thermal Phase Lag Heterodyne Infrared Imaging for Current Tracking in Radio Frequency Integrated Circuits,” Appl. Phys. Lett., 2017, 110, p 094101. • N. Rajic and C. Antolis: “An Investigation of Noise Performance in Optical Lock-In Thermography,” Infrared Phys. Techn., 2017, 87, p 1. • B.V.Ravi,M.Xie,andD.Goyal: “InvestigationofMultiple Heat Source Effects in Lock-In Thermography Applications inSemiconductorPackages,” IEEETrans. Compon., Packag. Manuf. Technol., 2018, 8, p 725. • M. Razani, A. Parkhimchyk, and N. Tabatabaei: “Lock- In Thermography using a Cellphone Attachment Infrared Camera,” AIP Advances, 2018, 8, p 035305. • K.Remes,K.Leppänen,andT.Fabritius: “Thermography Based Online Characterization of Conductive Thin Films in Large-Scale Electronics Fabrication,” Optics Express, 2018, 26, p 1219. • J. Rho,M. Lim, S.S. Lee, et al.: “AFM-Thermoreflectance for Simultaneous Measurements of the Topography and Temperature,” RSC Adv., 2018, 8, p 27616. • S. Roy and R. Gupta: “Non-Destructive Approach for Severity Investigation of Shunts in Crystalline Silicon Photovoltaic Modules by Combination of Electroluminescence Imaging and Lock-In Thermography,” Meas. Sci. Technol., 2019, 30, p044009. • A. Shang and X. Li: “Photovoltaic Devices: Opto- Electro- Thermal Physics andModeling,” Adv. Mater., 2017, 29, p 1603492. • P. TavakolianandA.Mandelis: “Perspective: Principles and Specifications of Photothermal Imaging Methodologies and Their Applications to Non- Invasive Biomedical andNon-DestructiveMaterials Imaging,” J. App. Phys., 2018, 124, p 160903. • J. Yang, S. Hwang, Y-K An, et al.: “Multi-Spot Laser Lock-In Thermography for Real-Time Imaging of Cracks in Semiconductor Chips during a Manu- facturing Process,” J. Mat. Process. Technol., 2016, 229, p 94. • H. Zhang, S-BWen, and A. Bhaskar: “Two-Wavelength Thermoreflectance in Steady-State Thermal Imag- ing,” Appl. Phys. Lett., 2019, 114, p 151902. • A. Ziabari, P. Torres, B. Vermeersch, et al.: “Full- Field Thermal Imaging of Quasiballistic Crosstalk Reduction in Nanoscale Devices,” Nat. Commun., 2018, 9, p 255. IN MEMORIAM John Copeland Matthews, 79, of Bethesda, Md., died on March 7 surrounded by his family after battling pancreatic cancer. At the time of his death, Matthews was CEO of Neocera LLC in Beltsville, Md., where he specialized in the failure analysis of electronic devices and integrated circuits. An entrepreneur with 35 years of experience serving the semiconductor industry, he launched Fusion Semiconductor Systems within Fusion Systems Corp. in 1979 to commercialize products based on a patented microwave-powered UV light technology. He also patented technology for stabilizing photoresist patterns leading to the successful development of a semiconductor capital equipment business. Matthews first started as a member on Neocera’s board of directors in 2001 and became president and CEO in 2006. He was an inspiring and thoughtful leader and mentor to many in his company. Matthews was a member of ASM International and two of its affiliates, the Electronic Device Failure Analysis Society and the Failure Analysis Society.