August_EDFA_Digital

edfas.org 7 ELECTRONIC DEVICE FAILURE ANALYSIS | VOLUME 20 NO. 3 modeling can be used to quantify expected yield loss and direct valuable failure analysis resources where the most yield benefit may be realized. REFERENCES 1. J.A. Cunningham: “The Use and Evaluation of Yield Models in Integrated Circuit Manufacturing,” IEEE Trans. Semicond. Manuf., May 1990, 3, p. 60. 2. C.H. Stapper: “LSI Yield Modeling and Process Monitoring,” IBM J. Res. Develop., 1976, 20 (3), p. 228. 3. C.H. Stapper: “Large-area Fault Clusters and Fault Tolerance in VLSI Circuits: A Review,” IBM J. Res. Develop., 1989, 33 (2), p. 162. 4. C.H. Stapper, F.M. Armstrong, and K. Saji: “Integrated Circuit Yield Statistics,” Proc. IEEE, April 1983, 71 (4), p 453. 5. E. PapadopoulouandD.T. Lee: “Critical AreaComputation viaVoronoi Diagrams,” IEEE Trans. Comput.-aided Design Integr. Circuits Syst., 1999, 18 (4). ABOUT THE AUTHOR John Hopkins received a B.S. degree in electrical engineering from the University of Colorado, Boulder in 1979 and anM.S. degree in electri- cal engineering from the University of Vermont, Burlington in 1985. From 1980 to 2014, he worked for IBM in Essex Junction, Vt. He has been an integration and yield engineer with GlobalFoundries in Malta, N.Y., since 2014. GUEST EDITORIAL CONTINUED FROM PAGE 2 3D structure of FinFETs, advanced techniques such as scanning transmission electron microscopy (STEM) and energy-dispersive x-ray spectroscopy (EDS) tomography are o¨en needed to understand the root cause. As the process becomes ever more sophisticated, defect mechanisms are also becoming more complex. For example, as the smaller CD strains the limit of fabrica- tion tools, the process window for eachmodule becomes tighter and therefore the root cause of a defect may depend on multiple process steps. As device geometries have shrunk beyond double digits nm, the time and eƒort required to find non-obvious defects has increased. To be successful, FA analysts will need to have an in- depthunderstanding of FA techniques and tool limitations inorder to rapidly identify and apply themost appropriate techniques. They will also need to develop close collabo- rations with cross-functional teams in order to speed up yield learning. Early identification of systematic process issues provides key information to the various technology teams for working model validation. Understanding the root cause of failures through precise localization, elec- trical characterization, and defect imaging is crucial for accelerating advanced technology development. ESREF 2018 The 29th European Symposium on Reliability of Electron Devices (ESREF 2018) will take place October 1-5 in Aalborg, Denmark. The international symposiumcontinues to focus on recent develop- ments and future directions in failure analysis, quality and reliability of materials, devices and circuits for micro-, opto-, power, and space electronics. It provides the leading European forum for developing all aspects of reliability, including management and advanced analysis techniques for present and emerging semiconductor applications. All aspects related to specification, technology andmanufacturing, testing, control, and analysis are addressed. In 2018, ESREF celebrates its return to Denmark a¨er exactly 20 years. The host city is known for the eƒiciency and reliability of its renewable energy plants, including photovoltaic and wind turbine technologies. For more information, visit esref2018conf.org . NOTEWORTHY NEWS

RkJQdWJsaXNoZXIy MjA4MTAy