May_EDFA_Digital
edfas.org 55 ELECTRONIC DEVICE FAILURE ANALYSIS | VOLUME 20 NO. 2 are now4GLTEworldphones capable of workingwithover 40wireless bands, and equippedwith carrier aggregation to improve signal sensitivity. The same can be said for the competitor phones fromSamsung, Huawei, Xiaomi, et al. Inparallel with the logic evolution, we’ve hadadvances in flash memory, the demand for more and more data driving the maximum memory from 8 GB to 256 GB in 10 years, and DRAM from 128 MB to 6 GB in some products. With the expanded wireless capability, the radio fre- quency (RF) end of the board is a lot more complex, and we can’t ignore the sensors. Fingerprint sensors were introduced in the iPhone 5S. In addition to motion and direction sensors, there are nowbarometric, temperature, and humidity sensors, and heart rate monitors. Now we have face recognition too, with its complex set of optical sensing tools. Sowhile we all anticipate the latest phone fromApple or Samsung to see what the newest processor is at the latest process node, we have to recognize that all the added capabilities have propelled other segments of the industry. Image sensors are now a much bigger deal, and have likely dealt a death blow to the compact camera industry. RF-SOI is not the niche technology that it once was, BCD-MOS is thriving in the power-management area, and even GaAs is having its day. The form factor has evolved too, from the flip-phone and candy-bar formats to the almost universal full-screen smartphone. There seems tobe a competition tomake the thinnest phone, aswell as thehighest performancedevice. The original iPhone was 11.7 mm, and it bottomed out in the iPhone 6 at 6.9 mm. Now the iPhone X is up to 7.6 mm, with the camera bump increasing the thickness. (I’m using iPhones for comparison, simply because the data and teardowns are well tabulated, making research for this piece much easier.) That, of course, has put pressure on the packaging segment of the business to innovate both dimensionally and cost-wise. Again looking at Apple, it is clear that wafer- level packaging (WLP) count has significantly increased— the iPhone 7 is up to 44, and the iPhone 8 and X models are in the 35 - 40 range. For a graphic, visit https://www. eetimes.com/document.asp?doc_id=1326998. In addition to the WLPs, we have evolved from the dual-stacked flash packages and PoP of the first iPhone to 16 dies stacked in a flash package, and thinner PoPs incorporating TSMC’s InFO fan-out wafer-level packag- ing (FOWLP), as well as other FOWLP usage in RF and PMIC chips. The latest innovation, seen in the iPhone X, is the use of substrate-like PCBs for the motherboards. We are back to two boards, linked with high-density PCB interconnect. I think we can conclude that mobile phones are now the main driver for both the process and packaging tech- nologies in the semiconductor business. When it comes to failure analysis, the move to nano- technology and vastlymore complex systems create a real challenge. This especially applies to thematerials analysis side, because in some cases we are now counting atoms. Tracking down an errant signal in something like the latest phone strikes me as much worse than a simple needle in a haystack. Kudos to the designers and manufacturers who manage to weed out almost all of these potential problems before the phone gets to market! ABOUT THE AUTHOR Dick James is a 45-year veter- an of the semiconductor industry and senior analyst for TechSearch International, based in Austin, Texas, a leading consulting company in the field of advanced semiconductor packaging technology. In addition, he is fellow emeritus for TechInsights, a Canada-based specialty, reverse engineering company, and a contribut- ing editor for Solid State Technology magazine. (a) (b) (c) iPhone X motherboards. (a) Top view of top board. Source: TechInsights. (b) Tilt view of underside of top board, showing high-density interconnect stack. (c) Bottom board. Source: iFixit.
Made with FlippingBook
RkJQdWJsaXNoZXIy MjA4MTAy