February_EDFA_Digital
edfas.org ELECTRONIC DEVICE FAILURE ANALYSIS | VOLUME 20 NO. 1 46 A new 10 × lens optimized for a 405-nm-wavelength light source and a long-working-distance lens was designed specifically for use with the LEXT microscope to reduce aberration and enable accurate measure- ments across the entire field of view. Meanwhile, 4K scanning technology with a resolution of 4096 pixels in the X -direction (four times that of the previous model) enhances resolution and improves the reliability of shape measurements (doubling improvement in the signal-to- noise ratio). These features enable the detection of near- vertical slopes and small steps without image correction. The OLS5000 microscope uses the PEAK algorithm for fast, precise measurements at both low and high magni- fications with four times the data-acquisition speed of the previous model. Smart Scan II and analysis template functions automate the sequence of steps from data acquisition to reporting. An optional expansion frame enables the OLS5000 microscope to accommodate samples up to 210 mm in height. Observation and measurement can also be performed using a long-working-distance lens, which enables a separation of up to 25 mm between the lens and the sample. For more information: web: olympus-ims.com . MINILOCK-PHANTOM RIE FEATURES VACUUM LOADLOCK Trion Technology’s compact Minilock-Phantom reac- tive ion etcher (RIE) with vacuum loadlock is designed to supply research and failure analysis labs with state-of- the-art plasma etch capability. The bottom electrode is available in either 200 or 300 mm sizes and, depending on electrode configuration, can process single wafers or mounted parts (3 in. to 300mm). It also hasmultiple-sized batch capability (4 × 3 in.; 3 × 4 in.; 7 × 2 in.). Applications for corrosive chemistry etching (Cl 2 , BCl 3 , SiCl 4 , HBr, NF 3 , etc.) include AlGaAs, gold, carbon, chro- mium, copper, GaN, GaAs, InAlGaN, InGaAs, InGaN, InP, light-emitting diodeMQMs, polysilicon, platinum, silicon, SiC, titanium, praseodymium, andother organicmaterials. Samples are loaded into the process chamber via the vacuum loadlock. This feature increases user safety by preventing contact with the process chamber and any residual etch by-products. The loadlock also allows the chamber to remain permanently under vacuum, thereby keeping out moisture and keeping the reaction chamber free of possible corrosion. Options include: • An electrostatic chuck (E-chuck), to more effectively keep the wafer cool during the etch process, uses a helium pressure controller to build up a cooling layer of helium on the backside of the wafer. • An inductively coupled option to create higher-density plasmas increases etch rates and anisotropy. For more information: web: triontech.com . OLYMPUS RELEASES NEW INVERTED METALLURGICAL MICROSCOPE Designed for the observation and inspection of metal components, the new OLYMPUS GX53 inverted metal- lurgical microscope features a light-emitting diode (LED) light source for ultralong life and lowpower consumption. The GX53microscope also incorporates the latest version of OLYMPUS Stream image analysis software (v. 2.3) for improved observation and reporting capabilities. Inverted metallurgical microscopes observe samples from underneath, enabling the user to inspect thick or heavy samples without adjusting the orientation of the sample surface. This capability makes the GX53 micro- scope a practical tool for viewing the microstructure of metals used in automotive and othermanufacturedmetal components. The GX53 offers advanced functions that help inspec- tors do their jobs faster: • See fine details: MIX observation contributes to clear imaging of microstructures and other surface features. • Coded hardware: Save observation settings for faster inspections and improved productivity. • True-to-life images: LED illumination offers a consistent color temperature. With the incorporation of MIX observation technol- ogy—a first for the GX series—the GX53 microscope can obtain surface structure images with exceptional clarity. MIX technology produces unique observation images by combining darkfield with another observation method, such as brightfield, fluorescence, or polarization. MIX observation enables users to view samples that are dif- ficult to see with conventional microscopes. The circular LED illuminator used for darkfield observation has a directional function whereby one or more quadrants are illuminated at a given time. This reduces a sample’s hala- tion and is useful for visualizing its surface texture. Meanwhile, the upgraded version of OLYMPUS Stream image analysis software uses image synthesis to provide clear images with minimal halation, even when viewing highly reflective samples.
Made with FlippingBook
RkJQdWJsaXNoZXIy MjA4MTAy