February_EDFA_Digital

edfas.org ELECTRONIC DEVICE FAILURE ANALYSIS | VOLUME 20 NO. 1 44 PRODUCT NEWS Larry Wagner, LWSN Consulting Inc. lwagner10@verizon.net PRESS RELEASE SUBMISSIONS: MAGAZINES@ASMINTERNATIONAL.ORG NEW ATOMIC FORCE MICROSCOPE STUDIES PIEZOELECTRICS AT THE NANOSCALE Combining speed with incredible precision, a team of Molecular Foundry scientists and industry users devel- oped a way to print extremely small devices on the tip of a glass fiber as thin as a human hair. These tiny devices precisely squeeze and manipulate light in ways that are unachievable by conventional optics. The team’s approach, called fiber nanoimprinting, builds tips 30 times faster than today’s sculpting approach. The scale-up path is to print many tips instead of sculpting individual tips. Tiny optics could help improve the design of solar cells, pharmaceuticals, and semiconductors. Fiber nano- imprinting speeds the production of nano-optics from several permonth to several per day. The technique opens the door to mass fabrication of nano-optical devices for widespread use. Nano-optics have the potential to be used for imaging, sensing, and spectroscopy and could help scientists improve solar cells, design better drugs, and make faster semiconductors. A big obstacle to the technology’s com- mercial use, however, is its time-consuming production process. The new fabrication method could unplug this bottleneck. Itwas developedby scientists at theMolecular Foundry in partnership with users from Hayward, Calif.- based aBeam Technologies. Their work builds on the campanile probe, which was developed byMolecular Foundry scientists four years ago and enables spectroscopic imaging at a resolution 100 times greater than conventional spectroscopy. Fabricating campanile probes has been part science and part art. The same applies to other nano-optical devices, such as microscopic lenses and beam splitters, which split one light beam into several. These devices require milling a 3-D shape with sub-100-nm-scale features on the tip of a wispy fiber, which is much trickier than fabricating a nanostructure on a flat surface such as a wafer. That’s where fiber nanoimprinting comes in. Its first step is themost time-consuming; scientists create amold with the precise dimensions of the nano-optical device they want to print. For the campanile probe, this means a mold of the probe’s nanoscale features, including the four sides and the light-emitting 70-nm-wide gap at the pyramid’s top. After the mold is created, it is filled with a special resin and then positioned atop an optical fiber. Infrared light is sent through the fiber, which enables sci- entists tomeasure the exact alignment of themold in rela- tion to the fiber. If everything checks out, ultraviolet light is sent through the fiber, which hardens the resin. A final metallization step coats the sides of the probe with gold layers. The result is a quickly printed—not meticulously sculpted—campanile probe. By doing this over and over, the team can make a probe every few minutes. For more information: web: phys.org/news/2017- 10-imaging-probe-optical-fiber.html#jCp. PIEZOELECTRIC FORCE MICROSCOPY REVEALS CHARGE MAPPING In this research, the material was stressed by the atomic force microscope (AFM) tip with nanometric size. The tip applied a force in the range of hundreds of microNewtons and measured the generated charge that was created in the material. The new mode was proved by characterizing several common ferroelectric materi- als: a periodically poled lithium niobate, bismuth ferrite, and lead zirconate titanate. The mode was employed in Fiber nanoimprinting accelerated the fabrication of this pyramid-shaped campanile probe imprinted on an optical fiber (captured in an SEM image). The gold layer is added after imprinting. The gap at the top is 70 nm wide, or 0.000002 in., or 100 times smaller than a single red blood cell. Photo courtesy of U.S. Department of Energy

RkJQdWJsaXNoZXIy MjA4MTAy