edfas.org 11 ELECTRONIC DEVICE FAILURE ANALYSIS | VOLUME 28 NO. 4 ABOUT THE AUTHOR Dr. Sam Lin is the regional marketing manager for Thermo Fisher Scientific, responsible for the semiconductor microscopy, advanced benchmarking, and failure analysis business across the Asia-Pacific and Japan (APJ) region. Lin received his Ph.D. in materials science and engineering from National Tsing Hua University, Taiwan. He began his career at FEI, later Thermo Fisher Scientific, and subsequently served as technical manager at BESI, leading hybrid bonding technology deployment in Taiwan and supporting technology introduction, process development, pre-sales, system implementation, and customer engagement. Since rejoining Thermo Fisher Scientific in 2022, he has leveraged his technical expertise together with strategic marketing leadership to help customers address increasingly complex semiconductor challenges through advanced benchmarking, failure analysis, and process characterization solutions. 4. S. Brand, et al.: “Non-destructive Wafer-level Bond Defect Identification by Scanning Acoustic Microscopy,” Microsyst Technol, 21, 2015, p. 1385-1394. 5. H. Yu: “Scanning Acoustic Microscopy for Material Evaluation,” Appl. Microsc., 50(25), 2020. 6. T. Dreier, D. Nilsson, and J. Hållstedt: “Fast and High-resolution X-ray Nano Tomography for Failure Analysis in Advanced Packaging,” Microelectronics Reliability, 168, 2025, p. 115694. 7. D-P. Tran, et al.: “Non-destructive Micro Analysis of Electromigration Failures in Solder Microbumps using 3D X-ray Computed Tomography,” Materials Characterization, 194, 2022, p. 112404. 8. P. Roumanille, et al.: “Using X-ray Imaging for the Study of Crack Development in Solder Reliability Testing,” Microelectronics Reliability, 149, 2023, p. 115079. 9. M. Mousnier, et al.: “Lock-in Thermography for Defect Localization and Thermal Characterization for Space Application,” Microelectronics Reliability, 88-90, 2018, p. 1021-1026. 10. S. Brand, et al.: “Localization Enhancement in Quantitative Thermal Lock-in Analysis using Spatial Phase Evaluation,” Microelectronics Reliability, 168, 2025, p. 115703. 11. A.M.R. Sharma, et al.: “Enhanced Infrared Imaging for Die-Level Fault Isolation using Lock-In Thermography,” Journal of Failure Analysis and Prevention, 24(9), 2024, p. 2129-2141. 12. H. Yang, et al.: “Brittle-to-ductile Transition of Au₂Al and AuAl₂ Intermetallic Compounds in Wire Bonding,” Journal of Materials Science: Materials in Electronics, 2018. 13. T.-F. Lu, P.-Y. Lee, and Y.S. Wu: “Effect of Compressive Stress on Cop- per Bonding Quality and Bonding Mechanisms in Advanced Packaging,” Materials, 17, 2024, p. 2236. 14. S.-C. Yang, Y.-T. Yang, and C. Chen: “Electromigration in Cu–Cu Joints: Measurement of Activation Energy and Polarity Effect,” Microelectronics Reliability, 33, 2024, p. 4522-4532. 15. T.-F. Lu, et al.: “Enhanced Copper Bonding Interfaces by Quenching to Form Wrinkled Surfaces,” Nanomaterials, 14(10), 2024, p. 861. 16. H. Lin, et al.: “Comprehensive Analysis of High-bandwidth Memory (HBM) with Helios 5 Laser PFIB: Integrating 2D High-resolution SEM Imaging and 3D Metrology,” NANOTS 2025. 17. C. Yang, et al.: “Effect of Sn Surface Diffusion on Growth Behaviors of IMCs in Cu/Ni/SnAg Microbumps,” Materials Characterization, 158, 2019, p. 109964. 18. C.-W. Kao, et al.: “Highly Robust Ti Adhesion Layer During Terminal Reaction in Micro-bumps,” Materials, 15, 2022, p. 4297. 19. Y.K. Lee, et al.: “Grain Modification and Formation of Tough IMC Phase in Submicron Sn–Ag Microbumps via Doping Zn and Ni in Cu Substrate,” Vacuum, 217, 2023, p. 112531. 20. C. Li, et al.: “Fe Content-dependent Non-monotonic IMC Growth Kinetics in Co–Fe Alloy Barrier Microbumps,” Materials Today Communications, 42, 2025, p. 109230. 21. C. Li, et al.: “Co–W Alloy as an Effective Barrier Layer for Suppressing Sn Surface Diffusion and Sidewall IMCs in Small-size Micro-bumps,” Journal of Alloys and Compounds, 948, 2025, p. 170825. 22. W. Guodong, et al.: “Microstructure and Mechanical Properties of Cu/In–Zn–Sn–Bi/Cu Joints Bonded with High-entropy Alloy Solder at Ultra-low Temperature,” Journal of Materials Science: Materials in Electronics, 36, 2025, p. 926. 23. X. Chen, et al.: “An ESD Robust High Holding Voltage Dual-direction SCR with Symmetrical I-V Curve by Inserting a Floating P+ in PWell,” Solid-State Electronics, 160, 2019, p. 107627. 24. S.-C. Huang, et al.: “Improving ESD Protection of 5 V NMOSFET Large Array Device in 0.4 µm BCD Process,” Microelectronics Reliability, 84, 2018, p. 48-54. Advertise in Electronic Device Failure Analysis magazine! For information about advertising in Electronic Device Failure Analysis: KJ Johanns, Business Development Manager 440.671.3851, kj.johanns@asminternational.org Current rate card may be viewed online at asminternational.org/advertise.
RkJQdWJsaXNoZXIy MTYyMzk3NQ==